You’ll find the best circular saw in any handyman’s tool bag. This tool is essential for any project that involves the cutting of wood. Your circular saw is essential for any project, including building decks or tree houses.
The buying guide will help narrow down the choices of top-selling models.
There are hundreds of options available for every budget, it’s no surprise. We are here to help you sort through all the options so that you can choose the best one for you and your requirements.
You will quickly notice one thing when you start your search for the best round saw for you. The differences between circular saws isn’t always easy to see. One circular saw may look good to you, but the one next to it might be a better choice. But, the price difference is one hundred dollars.
I’ve tried to find eight circular saws at a variety of prices and platforms in this guide. Every saw is different, which is great because everyone is unique. We hope you find a saw that catches your attention.
The Hitachi C7ST is distinguished by its distinctive styling, powerful motor and low center-of-gravity. Bosch presents the CS5 with its left-blade design, which can make life easier for right-handers. If you are looking for a feature-rich powerhouse, Makita has it.
It all boils down to you, as the operator.
There Are Two Types Of Drives For Circular Saws:
There are two types of drive for circular saws, sidewinder or worm drive. Direct drive is also known as sidewinder. These are the most popular type of circular saw, and they are probably the one you are most familiar.
The worm drive circular saws differ slightly. The worm gear is used to drive the blade, making them longer than smaller sidewinders. The blade is more likely to be on the left side of worm drive circular saws than it is in sidewinders.
Worm drive saws are heavier and more expensive than other types. They also require oil to stay lubricated. They are best for heavy-duty, regular use. They are not able to do much more than a sidewinder, except for the occasional abuse that contractors might give them.
There are many sidewinder circular saws out there that can withstand the test of time, even if they are used every day. While there are likely more than a few people that would love to slap you for this, for the average homeowner, I can’t see why a wormdrive circular saw is better than a sidewinder. This is why no worm drive saws make it on the list.
The Best Circular Saws
DeWalt DWE575SB 7-inch, 15-amp Circular Saw
The DeWALT DWE575SB was designed to be durable and easy-to-use. The ball bearing design of the lower guard allows for easy retraction. High-quality stamped aluminum is used to make the shoe. This provides a strong and stable base for cutting. The shoe even has a dust blower built in that clears the cut line when cutting.
DeWalt DWE575SB, weighing in at 40 kg, is a powerful saw that can reach 5,100 RPM. You can also make bevel cuts of up to 57, with stops at 22.5 or 45. At 6 cm at 90, and 5 cm at 45, the cutting depth is exceptional. The electric brake is perhaps the most important feature. It will bring the blade to a complete halt as soon as the trigger is released.
Bottom line: The DeWalt DWE575SB saw is light, balanced, powerful, and safe.
The DeWALT Circular Saw: Facts and Features
- 90 mm cutting depth
- 45 mm cutting depth
- You can get up to 57 bevels with stops at 22.5 or 45
- It is very light at only 40kg
- Right side blade
- Electric brake
- Spindle lock
- Dust blower
Hitachi C7ST 7 -inch, 15-amp Circular Saw
Hitachi is a brand that is often overlooked, but it is a relative newcomer in the power tool industry. Japan’s first electric induction motor of 5-horsepower was the company’s first product. Hitachi power tools offer great quality and are relatively affordable.
The C7ST offers a powerful 15-amp motor that can reach 6,000 RPM. Hitachi C7ST circular-saw is capable of doing everything. This circular saw is strong and durable, well-made. It is made of aluminum and steel, and has easy-to-read side weights. It is also lightweight at only 43 kg
The Hitachi C7ST’s price is at the lower end of this range. The Hitachi C7ST is a reliable, powerful circular saw that comes at an affordable price.
The Hitachi Circular Saw: Facts and Features
- 90 mm cutting depth
- 45 mm cutting depth
- Up to 45 Bevels
- Weighing in at only 43 kg, it is light
- Right side blade
- The soft grip handle minimizes vibrations in the hands
- Bevel and depth adjustments by single-hand
- Spindle lock
- Dust blower and dust chute
- 5-year warranty
Bosch CS5 7 -inch, 15-amp Circular Saw
The Bosch CS5 lightweight saw is very powerful. The motor’s 15-amp power will deliver 6,200 RPM at no load. This saw is used every day by a friend of mine. Let’s call him Eric. Eric is a deck builder and has tested the Bosch CS5 circularsaw.
Eric has owned the Bosch CS5 for approximately a year and boasts that it can cut through any material. The Bosch CS5 is often used by Eric to cut through woods such as Grappa and 2xs that have been wet pressure-treated.
The Bosch CS5 features an anti-snag lower shield that allows you to continue cutting without needing to retract it. This is a great feature for smooth transitions and tricky cuts. It is a left-blade model, which is preferred by some users over a right-blade. The operator can see the cut-line better if they use a left-blade saw. The CS5 does not have a dust blower so it could end up being a wash.
The Bosch CS5 circularsaw is a mid-range saw. It is quite affordable for a saw with a left-blade design. The Bosch version is more affordable than the left-blade design.
The Bosch Circular Saw: Facts and Features
- 90 mm cutting depth
- 45 mm cutting depth
- Up to 56 Bevels
- Even 45kg!
- Left side blade
- Spindle lock
- Anti-snag lower guard, so you don’t have to retract it before making a tricky cut
Makita 5007MG 7-inch, 15-amp Circular Saw
Makita appears to have a keen understanding of how to combine useful features with a powerful saw. This saw features a variety of magnesium parts that are lightweight and durable. The motor’s 15-amp power output is 5,800 RPM.
Two of the most prominent features are very compatible. These are the integrated dust blower and two LED work lights. Both of these will let you see exactly where you cut and help you get the best cut possible. It is easy to read the scales and bevels and can be adjusted with one hand.
Makita 5007MG’s price tag is high, which can be a deal-breaker for some. Makita tools are well-known for their reliability and longevity, and this saw is no exception.
The Makita Circular Saw: Facts and Features
- 90 mm cutting depth
- 45 cm cutting depth
- You can have up to 56 bevels with stops at 22.5 or 45
- Bevel and depth adjustments by single-hand
- Lightweight and durable 48 kg
- Right side blade
- Spindle lock
- Dust blower
- Two LED work lights
- Scales that are easy to read
SKILSAW SPT77WML-01 15-Amp 7-1/10 Cm Lightweight Worm Drive Circular Saw
You have been missing a lot if you’ve been sleeping on SKILSAW products recently. With the recent additions to its product line of affordable, high-quality products, SKILSAW is now a major player in the powertool market. The lightweight circular saw SKILSAW SPT77WML Worm Drive is one of these products. This machine weighs 53 kg and has a 53-degree bevel. It also boasts 15 amps of power. The SKILSAW SPT77WML Circular Saw is not only equipped with a worm drive but also has many cool features you won’t find on other circular saws. We love the 1/4-1/2 in, 3/4 in and 1/2 in cut ready indents for quick and easy adjustments. Why choose worm drive over a conventional circular saw? Let me tell you. It’s finally possible to buy a super-tough circular saw with the torque and strength to do those tough cuts. Why choose a weaker circularsaw when you can get a powerful worm drive circularsaw at a similar price? It’s a simple decision to buy the SKILSAW SPT77WML Circular saw.
The SKILSAW Circular Saw: Facts and Features
For tons of torque, use a worm drive. Easy adjustments are made with the Ready-to-Use Indents You can make cuts as far as 53 degrees bevel. 15 amp best-in-class dual-field motor. Anti snag lower guard.
The Best Cordless Circular Saws
Ryobi P507 6 -inch, 18-Volt Circular Saw
Ryobi’s P507 cordless circular mower puts a strong emphasis on delivering solid performance at a reasonable price. If you already have a Ryobi ONE+ collection, this price will be even lower. However, if you don’t have a collection built on the Ryobi ONE+ platform, these will increase the price.
The P507 does not have any significant features, such as dust blowers, work lights, or lasers, but that is to be expected given the price. The P507 has a lot of cutting power at 4,700 rpm and a left-side blade that allows you to see your cut line.
The 6-inch blade will allow you to reach a depth of just under 5 cm at 90, and just below 1 inch at 45. The P507 can be angled up to 56 cm and weighs in at 2 kg, before you add a battery.
This cordless saw is great value for money and perfect for those who don’t need any extras.
The Ryobi Circular Saw: Facts and Features
- 90 mm cutting depth
- 45 cm cutting depth
- Up to 56 Bevels
- Bevel and depth adjustments by single-hand
- Only 2kg (without battery).
- Left side blade
- Spindle lock
Milwaukee M18 Fuel 2731 7 -inch, 18-Volt Circular Saw
Milwaukee’s M18 Fuel 2731 is a powerful, well-designed and highly capable saw. This is also the only 7-inch cordless circular saw. It can make up to 300+ cuts thanks to its 18-volt motor, which produces up to 5,000 RPM. This should be enough for the average homeowner.
Milwaukee used magnesium in the shoe and blade guard to ensure durability. The saw is only 4kg with the battery. The key features include an LED work light and easy-to-read scales.
Milwaukee is known for its top-quality products. The fact that the M18 Fuel 2731 is backed by a 5-year warranty shows how serious they are about their product.
The Milwaukee Circular Saw: Facts and Features
- 90 mm cutting depth
- 45 mm cutting depth
- Up to 50 Bevels
- Bevel and depth adjustments by single-hand
- Only 4kg with the battery
- Right side blade
- Spindle lock
- LED work light
- Scales that are easy to read
- More than 300 cuts for a fee
- 5-year warranty
DeWALT DCS391B 6 -inch, 20-Volt Circular Saw
The DeWALT DCS391B is similar to the Ryobi. It focuses on functionality with powerful power and low cost. The saw is powered by a powerful 20-volt motor that runs at 5,1250 RPM. It can handle 45 bevel cuts in 2x materials with ease.
You can get it to bevel up 50, but at 45 you’ll barely clear 2x material. To ensure durability, DeWALT used a magnesium shoe. However, the lower guard is made of plastic. The plastic lower guard is quite a problem, considering how much abuse it takes. For some users, this can be a deal breaker.
Although the DCS391B comes at a reasonable price, it doesn’t come with a charger or battery. This saw will work well if you have tools that run on the 20V Max platform. You will need to purchase a charger and a battery if you don’t already have them.
The DeWALT Circular Saw: Facts and Features
- 90 mm cutting depth
- 45 cm cutting depth
- Up to 50 Bevels
- Bevel and depth adjustments by single-hand
- Without battery, it weighs in at 3 kg
- Left side blade
- Spindle lock
Makita XSH03Z 6 -inch, 18-Volt Circular Saw
The XSH03Z Makita is a premium saw that offers tons of features and innovative technology. You will find LED work lights, an electronic brake, a dust blower and a battery indicator.
The XSH03Z is loaded with plenty of fun features. The BL brushless motor generates 5,000 RPM with bevels of up to 50. Automatic Speed Change allows you to adjust the speed and torque of the blade on the fly according to your saw’s needs.
The saw’s shoe, upper and lower guards are made of magnesium, which helps keep it at 33 kg. All of this adds up to a premium saw that commands a premium price but is not too expensive. The XSH03Z has a lot of great features.
The Makita Circular Saw: Facts and Features
- 90 mm cutting depth
- 45 cm cutting depth
- You can bevel up to 50, with a stop at 45
- Bevel and depth adjustments by single-hand
- Only 33kg with the battery
- Left side blade
- Spindle lock
- Two LED work lights
- Scales that are easy to read
- Automated Speed Change adjusts the blade’s speed depending on the difficulty of each cut
- Indicator of battery life
- Electric brake
- Dust blower
- Long life with improved dust and water resistance
- Hook for integrated rafter
DEWALT DCS577B FLXVOLT 60V MAX 7-1/10cm Worm Drive Style Circular Saw
Dewalt is a well-known brand that has been extensively tested and proven to be a reliable tool brand. You have a winner when you add a cordless circular saw with worm drive to the mix. The DEWALT DCS577B 60V 7,1/10 cm Worm Drive Circular saw is an excellent choice. The brushless motor delivers 5,800 RPM and a maximum output of 2,400 watts. The DEWALT DCS577B circular saw has an electronic brake that increases safety and battery life. The bevel capacity is 53 degrees, and the depth can reach 2-7/16. This will suffice for most projects. Dealt also offers a 3-year limited warranty.
The DEWALT DCS577B Facts and Features
- Hook to hold your tool in place when it is not being used
- Dust blower integrated
- Electronic brake
- Worm Drive
- Motor with 60V brushless power
- Rear handle for easier handling and better line of sight
PORTER-CABLE PORTER CABLE PCC660B 20V Max Lithium Bare 6-
Sometimes, bigger is not always better. Sometimes, a bigger tool can prove to be too much and can pose problems depending on the job. The cordless PORTER CABLE PCC660B 20V Max Lithium-Barre 6-is the solution.
The PORTER-CABLEPCC660B Circular Saw: Facts and Features
- Only 6.2kg makes it super light
- 20V up to 4,000 RPM
- Non-traditional bevels up to 50 degrees
- Very affordable
Makita XSR01Z 36V Brushless Cordless Rearhandle 7-1/10cm Circular Saw
The popularity of rear-mounted circular saws is growing rapidly, and with good reason. Cordless circular saws are becoming less of a novelty and more of an efficient power tool. The Makita XSR01Z 36V Batteryless 7-1/10cm Circular Saw offers all the benefits mentioned above in a single package. The Makita XSR01Z is a combination of two 18V Lithium Ion batteries. It provides 36 volts to perform the tasks previously reserved for corded circular saws. Now you can move freely without being restricted by power. It’s pretty amazing, if I may say so. The brushless motor runs at 5,100 RPM, and can be controlled electronically to increase efficiency. The Makita XSR01Z was efficient enough to make over 500 cross-cuts of 24 lumber in a single charging. This is enough power to do most days work. The Makita XSR01Z may be the perfect tool for you if you’ve been hesitant about moving into the cordless worlds of circular saws.
The Makita XSR01Z Circular Saw: Facts and Features
- More than 550 cross-cuts of 24 in one charge
- For greater performance, auto adjustments can be made to increase speed and torque
- Brushless motor delivers 5,100 RPM
- Two 18V L-ion battery packs provide 36V
- For greater comfort and visibility, rear handle
It’s Time For A Cordless Circular Saw
You have two options for corded circular saws: corded (battery-operated) or corded. Both have their advantages and disadvantages. I’ve tried both. I’ll try to give you a full list of reasons why you should or shouldn’t choose one platform.
The Best Circular Saw Guide Corded Pros & Cons
A corded circular see is almost always more powerful than a non-corded one. A corded circular saw is better if you plan on using it to cut through thick woods and other hard materials. While a cordless circular saw can make these cuts, it will not be able to do so quickly.
A corded saw is also a great choice for uptime. You won’t be left behind if your batteries go flat. You’re good to go as long as there is an outlet nearby and an extension cord.
The cord is the main problem with a corded circular-saw. The maximum length of the extension cord will limit your ability to do work. This is not a major problem in most cases, but it can be a problem if it does. If you don’t already own one, an extension cord can increase the cost of your saw.
Pros And Cons Of Cordless Circular Saws
A cordless circular saw has the obvious advantage of having no cord. Although it may not seem important, imagine your cordless drill suddenly having a cord. You still think it is not important?
A cordless circular saw allows you to go anywhere you want. It doesn’t take long to untangle and find the extension cord.
A cord is one less thing you have to remember and one less thing that you need to handle. Although you may forget batteries, I cannot count the number of times I have taken an extension cable for granted and lost it. I have never done that with my battery. This is less important if you do your projects at home.
If you have to purchase the batteries, cordless circular saws are typically more expensive than corded ones. The batteries are often part of a larger platform, and compatible with other tools using the same type of battery.
This has both good and bad sides. This simplifies things as all your tools can use one battery. However, it means that you must purchase a single platform and one brand. This reduces your choices. I love options. I don’t like the idea of having to replace all my tools if a platform is discontinued.
Last but not least, cordless circular saws have shorter blades than corded saws which usually have 7-inch blades. A six-inch blade will barely get you through a 24 at 45. The tool’s capabilities are severely limited if the blade is smaller than 6 inches. Although there are 7-inch cordless circularsaws, they are rare.
Information About The Extension Cord
Extension cords come in different amperages and not all are created equal. You will need an extension cord to meet the power requirements of your corded circular saw.
Insufficient power can not only cause the saw to stop performing at its best, but it will also reduce the life expectancy of the saw. You can get more power with an extension cord, but the saw will draw only the maximum amps it is designed for. The saw’s power should not be cut off. You will need a 14-gauge extension cable for corded circular saws. They typically run around 15 amps.
Features Of Circular Saws That Matter
Dust Blower
Dust is created when you use a saw. This dust can be scattered all over the place without any care. This can make it hard or impossible to see your cut line even with a laser light or LED work lamp. This can affect the quality and appearance of your cuts.
This problem is usually less severe for short cuts, such as trimming a 24. This can become a problem when you make longer cuts and especially when you are ripping down pieces. The dust blower is your best friend.
The dust blower does exactly what it says. It blows away any dust that accumulates before the saw is used to cut. This handy feature works well in conjunction with an LED light or laser.
Electric Brake
The electric brake reverses the current in the saw and stops the blade quickly when the trigger is released. The best saws can stop the blade in under 2 seconds.
This is a wonderful feature as we often assume that once the trigger is released, the saw will stop running and be safe. It is easy to accidentally put your hands in the wrong places or to move the blade while it is still moving. This can lead to serious injuries. This can be prevented by using an electric brake.
Laser Guide
They sound great and can be a lot of fun. However, they are not very useful in setting up cuts. They are not accurate at all. Once I start cutting, I am too focused on my shoe guide to be able use the laser. Combining that with the accuracy issues on lasers, I don’t get much mileage from them.
LED Work Light
This feature is much more appealing than lasers. An LED work light, which is a small flashlight attached to the saw, turns on when the trigger has been engaged. If you are not outside, this makes it much easier to see your cut line.
Even in a well-lit workshop with a lot of light, standing in the wrong spot can cast shadows on the work-piece making it harder to see. Combine the LED work light and a dust blower to create a very handy combination.
Cut Depth And Depth Adjustment
A circular saw is best for cutting 2x or smaller materials.
You can cut thicker material, but it will not be the easiest work. The blade depth should be between 1/8 and 1/4 inch.
All the saws, 6 inches and 7 inches, will be capable of cutting through 5 cm pieces of lumber at 90. Beveled cuts are a bit more difficult. The 7-inch saws can be used to cut through at 45 with some space, but the 6-inch saws have a lot of room. Literally. It can be difficult to tell if your saw is capable of cutting through material beyond 45.
You’ll be able to quickly adjust the depth of your cuts. Some models can be adjusted with one hand, using quick locking/unlocking levers. Others may require more effort.
It is important that you choose a circular saw with the right depth and easy to adjust if you intend to make a lot beveled cuts.
Bevel Capacity, Bevel Adjustment
A bevel cut refers to any cut in which the blade is not perpendicular with the material. A saw housing or shoe that can tilt is almost a must-have feature. I’m not sure if a circular saw could do this, and even if it could, the cost would be prohibitive enough to compensate for the reduced versatility.
Some do the job better than others. Some saws, such as the 6-inch blade saws, may not be able to cut through 2x material at 45 or better. Although it is rare to need to exceed 45, you will want to ensure that you get a saw that can do that.
It goes without saying, but it bears repeating. It is easier to adjust the bevel of a saw. This boosts confidence. Simple to read scales will ensure that you have the saw in the correct place. Stops will take the hassle out of certain cuts.
Left Blade Circular Saw, Or Right Blade Circular Saw
Although it may seem like a minor issue, the side on which the blade is located can have a major impact on how satisfied you are with your saw. It can make or break a saw if you don’t know the difference.
It is mostly a matter preference. Fair warning: I am a right-handed person and I cannot speak on this subject as I have never had to use my left hand.
The traditional circular saw arrangement is a right blade saw. This is where the blade is on the right-hand side. This configuration allows you to guide the blade by running the shoe’s notch along your cut line.
A left-blade saw is the exact opposite of a right-blade saw. This gives you the advantage of being able to see your cut line while operating the saw. This seems to be the best way to design the saw, but it has its drawbacks.
A left-hand blade saw will blow saw dust to the left side, instead of the right. This is where you’ll be standing. This could lead to a bit more mess in your clothes, or worse, your eyes.
If there is a kickback, the second problem is where your body will be located. A right blade saw will generally have your body to the side of it, which reduces the likelihood that you will get a kickback. If the blade kicks back, you can move it closer to your body. If you’re cutting with your righthand on the trigger, your left arm must cross the top of a left-blade saw.
There are many people who swear by both sides of the coin, just like with sidewinder or worm drive. This may be something that you can just try and feel. As shoes.
Safety Information
Safety is paramount when operating power tools. It is easy to get overconfident with our ability to use circular saws. It is easy to get into bad situations when we do this.
The most serious danger is kickback with a circular saw. If the blade is pinched or binds, this can occur. Kickback can cause the saw’s blade to shoot back at the operator. This will happen so fast you won’t be able to react. It is important to know how to cut a saw.
Your waste material should fall to one side. You also need to set up the cutting so that it does not pinch the blade. If you are concerned about kickback, an electric brake might be the right option. However, the brake is only effective if the trigger has been released.
Safety glasses are required when you’re cutting. I was convinced by the one-shot below my eye that this was a good idea. If you’re going to make a lot of cuts, hearing protection and a dust mask should be considered.
What Cuts Can Circular Saws Make?
One of the most versatile tools you can have in your toolbox is a circular saw. You will see two major cuts made by a circular saw: cross cuts (perpendicular and parallel to the grain) or rip cuts (parallel and the grain).
By adjusting the settings on your saw or plunge cutting machine, you can make bevel cuts. These are cuts that are angled across the wood’s edge. You can even make miter cuts with a little practice. If you feel the need to push your limits, try making dadoes, lap joints, or rabbets using multiple passes.
If the curve isn’t too tight, you can make curved cuts. A circular saw can do almost anything, which is why it is the most common saw in a toolbox.
The Best Circular Saw Brands
DeWALT
In 1924, DeWALT was established with the invention of a universal woodworking tool. DeWALT is a well-known brand for its high quality and long-lasting products. Their product range includes radios, work lights, axes, and nail sets.
Makita
Makita was founded in 1915, as an electric motor repair and sales business. Makita has become a global power tool giant. Makita is a professional-quality brand, regardless of whether it uses gas, electricity or batteries.
Hitachi
Hitachi is one those brands that you didn’t know was into power tools. Then you discover that they not only make great tools, but also make them. Hitachi was founded in 1948 to manufacture electric power tools and coal mining machinery. They have expanded their tool line to include pneumatics and metalworking tools, as well as saws, drills, and other useful tools.
Bosch
Bosch was founded by Robert Bosch in 1886. He is well-known for saying he would rather lose money than have trust. Bosch has been a leader in quality and innovation for a wide range of equipment and services, beyond power tools. Bosch manufactures auto parts and accessories. They also have service centers for automobiles, garden tools, and appliances.
Ryobi
Ryobi was founded in Japan in 1943 and started making die-cast products. The business eventually expanded to include parts for electronics and telecommunications. The company also offers a variety of professional and consumer-grade power tools, as well as lawn and garden equipment.
Milwaukee
Milwaukee was founded in 1924 by the Hole-Shooter, their first portable, -inch drill. Milwaukee is perhaps most well-known for its professional quality, heavy-duty tools. However, they have also revolutionized the 7-inch circular saw with the Sawzall. They are the first to use Lithium-Ion batteries to power tools.
Most Frequently Asked Questions
Q. Can my circular saw be used to cut metal, stone or laminate?
A: It is not recommended to use a circular saw designed for cutting wood or metal to cut stone. The circular saw’s open housing makes this difficult. A circular saw with 100 teeth or more could be used to cut laminate.
Q. Do I need a particular saw blade to make certain cuts?
A: Yes, and no. It’s not a question of should versus could. You can use crosscut blades for ripping, but you probably shouldn’t. It all depends on what finish you desire. While a general-purpose blade can do the job well across many applications, a specialty blade is better if you desire a professional look.
Q: Can I sharpen my circular saw blade?
A: If it is steel, you can likely sharpen it with a file or a sharpening instrument. You will need to hire a professional to sharpen your carbide blade. Carbide requires special equipment.
Q. Why doesn’t my saw cut square?
A: If it isn’t cutting square, there are a few things you can do. First, make sure the bevel adjustment is set at 0 on your router. Next, make sure the blade is not warped or damaged. After everything is checked, you may need to adjust the bevel to get it back to square. This video shows you how to do it.
Final thoughts on how to buy the best circular saw for the money
A circular saw is a great addition to any DIYer’s toolbox. It is probably the most common power saw that people will ever own. These saws can make any cut you want, but they need to be treated with respect in order to avoid injury.
You need to be clear with yourself when you are looking for the right circular saw. Also, consider how you intend to use it. To get a better idea of what works best for you, I recommend that you try both cordless and corded as well as the left and right blades.
While price is important, this is not something you will be buying often. Make sure you get a saw that suits your needs and is easy to use.
This guide was helpful. You can also check out other articles/guides that I have written:
