How To Install Blade Guard On Craftsman Table Saw
A blade guard is an important safety measure for your Craftsman tablesaw. This video will demonstrate how it is done quickly and easily.
Properly installed blade guards protect your hands and fingers from being cut by the spinning blade. This is a straightforward process and this article will walk you through it step by step.
The installation will take only a few minutes and you can then use your table saw without worry knowing your fingers are safe.
How To Install Blade Guard On Craftsman Table Saw Step By Step
These are the steps for installing a blade guard to your Craftsman tablesaw.
- Unplug the saw’s power source.
- You can remove the throat plate by unscrewing two screws that keep it in place.
- Then raise the blade to its maximum height.
- Attach the blade guard to the bracket by attaching it first to the back side of the table saw (under the tabletop). Slide the guard onto bracket. I use Craftsman 089037007700 Blade guard.
- Use the two screws from Step 2 to fix the bracket in place.
- Place the throat plate in place.
- Turn the saw on and check the blade guard. Move it up and down to ensure it is secure.
What’s The Purpose Of A Blade Guard?
The blade guard’s primary purpose is to protect the user from cutting themselves accidentally. You can do this by making it difficult or impossible for the user to reach the knife’s edge.
A blade guard’s second and most important function is to prevent debris from getting into the knife’s handle or mechanism. A well-designed guard will provide you with a safe place to rest your hands while you use the knife.
A blade guard may also be necessary for other reasons. Some people use knives as eating tools. They may stop using the knife if the guard is in the way.
Some people don’t like sharp blades around them. Instead, they prefer duller blades. A guard is safer for some people. Others do not. Each to his own.
Safety Tips
Using the wrong tool to cut can lead to serious injury. A circular saw is not the right tool for you. The circular saw is not used to cut across the grain, but for ripping lumber. Use the right tool for the job.
When possible, use an anti-kickbackpawl. Most power miter saws have anti-kickback blades. These devices reduce kickbacks. Kickbacks are when the spinning blade strikes something while it is moving away from the workpiece.
The blade will spin toward the operator when it strikes the object with its force. This action is prevented by an anti-kickback device.
- To safely use a table saw, you must first set it up correctly. Before you turn on the motor, make sure that all parts are aligned correctly.
- To make sure the blade has a clear path, place a scrap piece of material against the fence. Make sure that the blade is clear of any obstructions before you begin cutting.
- You must ensure that the blade guard is properly in place. The blade guard can be either permanently attached or removable. It doesn’t matter what, a blade protector is better than a regular shield because it lowers the chance of getting an eye injury.
- Attach the blade guard on the side of your table saw. It can be bolted down or screwed into place.
- Adjust the height of your blade guard by turning on the motor. You can adjust the height of the blade guard by turning on the motor.
- Adjust the angle of your blade guard. Depending on the location you intend to cut, angle the guard forward or backward. If you are making a horizontal cut, for example, the guard should be slightly in front.
- Test the blade guard by turning off the motor. Verify that there are no loose parts. Check to make sure the blade guard is in the right place. If needed, tighten bolts or screws.
You should clean a permanent blade guard regularly. If it is not permanent, clean it occasionally.
Conclusion
Blade guards help prevent injury from flying objects. You must ensure that your blade is securely attached to the saw. When setting up your tablesaw, follow the instructions above.
FAQ,s
What Is A Blade Guard?
Blade guards can be made from metal, plastic or wood. Metal guards are used primarily for industrial applications.
Although plastic guards tend to be cheaper than metal ones, they are more likely to fall apart. Wooden guards tend to be less expensive than other types. There are many sizes and shapes available for wood guards.
A fence is one common type of wood guard. Fences are used to keep the blade in its place during operation. A pawl is another popular guard.
Which Is The Biggest Blade That Can Be Used On A Saw?
There are two sizes: the 30 cm and the 36 cm. The smaller size is best for small jobs, while the larger one is for more heavy-duty tasks such as framing.
When wood particles are caught between the teeth and fence, they can cause splintering. Make sure that the fence is parallel with the blade to avoid splintering
You should also try to make straight lines. A router is better for cutting curves. Best Large Blade 14BLADEST
Why Is My Table Saw Missing An Auto-stop Function?
Modern table saws don’t have an auto-stop feature. They have a safety device called the brake system. This brake system stops the blade automatically when it encounters obstruction.
What Happens Next If You Finish A Piece Of Wood But There Are Still Parts?
You’ll be able to see that you haven’t finished cutting the wood piece completely. The last piece of wood remains stationary after the saw has finished cutting.
The remainder of the piece moves past the blade creating a ragged edge.
