When installing a chainlink fence, the first step is to cut the chain link fence to the required size.
Although it may sound daunting and difficult at first, it is actually quite simple. It is even easier because there are no actual cuts involved.
You can unweave any section of chain link fence fabric with the right tools and a little knowledge.
It is still possible to cut chain link fences with bolt cutters or heavy-duty s. Let’s discuss this briefly below.
This is exactly how to make chain link fence.
What You’ll Need
It is easy to make a chain link fence with just a few tools.
Here’s what you need:
Step I: Take Your Measurements
As with most DIY projects at home, cutting chain link fences requires some preparation.
Measuring is the most important thing. It is important to measure the area to be cut, even though measurements don’t have to be exact as for a woodworking project.
Take measurements of the area to be enclosed and transfer them to the chain link fencing material.
Step II: Fence Stretcher And Tension Bar
Installing chain link fencing requires a tension bar. It serves to evenly distribute tension across the fence.
Before you attempt any cuts, make sure to install the tension bar. You can also remove the end of a length fencing with the tension bar.
These end pieces are called fence stretchers. They are responsible for helping the tension bar to maintain the tension once the fence is installed.
You can access the fencing material by removing the fence stretcher.
Step 3: Size Up
To unweave sections from the chain link fencing, use your lineman’s pliers.
It is simple, but tedious, to unweave these sections.
Continue the process, twisting the top- and bottom weaves until you have a piece of chain link fence fabric that is free.
After the fence is installed, you can reinstall the fence stretcher.
Keep the cut portion of the chainlink fence weave in your possession just in case.
How About A Real Cut?
Sometimes, unweaving a chain-link fence is not enough.
A pair of bolt cutters is the best tool for cutting if you have to.
Bolt cutters are a cost-effective and easy to use alternative to power tools or hacksaws.
Bolt cutters can also be used by casual DIYers.
To use bolt cutters to create a chain link fence, you simply need to measure and then cut through each wire.
Bolt cutters can even cut through the tension bars of fencing.
How To Cut A Chain Link Fence Post
The chain link fencing can be cut in two parts.
You may also need to trim the actual chainlink fence posts in certain circumstances.
This project is straightforward and easy, even if it seems complicated to you right now.
It is as simple as taking accurate measurements and transferring them to each post. Then, use a hacksaw to cut the wood.
It is essential that the blade of your tool can cut through metal in both cases.
Personally, I prefer to use a reciprocating saw because it makes the job so much easier and faster.
This project has one drawback: the chain link fence post is prone to wobbling when you make your cuts.
Heavy-duty woodworking clamps are recommended to secure the fence post to your table.
You can also ask a friend to help you cut the chain link fence posts. This will prevent the post from rolling as you cut.
Last Thoughts
It is not difficult to see how cutting chain link fence can seem daunting.
It’s easy to get the right tools and be a good teacher.
You should have read my complete guide to learn how to cut chainlink fence and chain link fence posts.
After you’ve finished this project, take a look at these top DIY projects to keep you busy!
